Description
DAB-151TP Case Iron Jet Pump 415V Shallow Well With Pressure Switch
The pump is a self-priming surface mounted jet pump and has a suction capability of up to 8m.
Applications
- Domestic installations where a suction lift is required
- Pressure boosting, irrigation and wash down
- Designed for pumping from tanks, rivers and dams
Constructional features of the pump
Pump: Cast iron pump body and motor support. Technopolymer impeller and diffuser.
Stainless steel adjustment ring. Carbon/ceramic mechanical seal.
Ejector: Cast iron body. Technopolymer A Venturi tube and brass nozzle.
The ejector is available in three models (E20 – E25 – E30) to be chosen according to performance requirements.
Constructional features of the motor
Asynchronous motor, closed and cooled with external ventilation.
Rotor mounted on oversized greased sealed-for-life ball bearings.
Built-in thermal and current overload protection and a capacitor permanently in circuit in the single-phase version.
For the protection of the three-phase motor, it is advisable to use a suitable overload protection complying with the regulations in force.
Manufactured according to CEI 61-69 standards (EN 60335-2-41).
Motor protection: IP 44
Terminal box protection: IP 55
Insulation class: F
Operating range: up to 4.3 m3/h.
– Liquid quality requirements: clean, free from solids or abrasive substances, not viscous, not aggressive, not crystallized, chemically neutral, close to the characteristics of water.
– Liquid temperature range: from 0°C to +35°C for domestic use (EN 60335-2-41)
from 0°C to +40°C for other uses
– Maximum ambient temperature: +40°C
– Maximum operating pressure: DP 82 – DP 102 6 bar (600 kPa), DP 151 – DP 251 8 bar (800 kPa)
– Installation: fixed in a horizontal position
– Special executions on request: other voltages and/or frequencies
- Pressure switch with adjustable differentia
- Pressure gauge
- Self priming centrifugal pump with excellent suction capabilty
- A pressure tank is required
Reviews
There are no reviews yet.